Project references - Battery Energy Storage System

A 250 kW / 295 kWh system installed indoors in cabinets. The installation was completed smoothly and at record speed, thanks to thorough planning, strong collaboration, and effective communication—nearly every aspect proceeded as intended. The system is primarily focused on providing ancillary services while also supporting behind-the-meter optimization.

A 500 kW 600 kWh system installed in cabinets indoors. Special attention was given not only to the installation planning but also to the ventilation setup. This project also provided valuable opportunities to engage with insurance companies, helping them better understand the chemical differences between LFP and NCM technologies—and highlighting the critical importance of a high-quality fire protection system in a BESS.

A fully EU-made concept for smaller BESS products in Europe. A 500kW / 602kWh battery storage system, fully designed in Sweden, containerized in Gothenburg, and delivered to our client in Örnsköldsvik. The system consists of a fire extinguishing system from Siemens, a Swedish-made EMS, and 42 battery modules of 14.3 kWh.

A project of 400kW-430kWh built with LFP-batteries in modules. Liquid cooled 10 foot container with PCD from Sinexcel. This container includes Lighting and a complete Fire Fighting System (FFS). Specially designed for ancillary services in Sweden.

A project of 1.2MW-3MWh built with LFP-batteries in modules of 51.2V-206Ah. With a PCS from CE+T this cabinet is designed for indoor use. The system is aimed for ancillary services & power charging of electric buses.

A project of 100kW-114.7kWh built with LFP-batteries in modules of 51.2V-206Ah. With a PCS from CE+T this cabinet is designed for ancillary services in Sweden.

A robust 375kW/430kWh system, designed to connect seamlessly to the local flex market in Båstad. Containerized battery energy storage system for outdoor use, strategically positioned next to a large grocery store. Built of 30 battery modules with an Integrated Swedish EMS system from Voltic. The scalable design allows for future capacity expansion without the replacement of the whole system.  

A 20 foot container with air cooling system of 750kW-860kWh. Designed for ancillary services to maintain grid stability and reliability. The system is built with battery modules inside of the container which enables capacity expansion without a full system replacement, reducing long-term costs for the end-client.